Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Velodyne DD+ 12" IP Database (Remote Codes)
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday April 3, 2018 at 00:17
rohit1712
Long Time Member
Joined:
Posts:
November 2010
10
I have three DD+ 12 inch velodyne subwoofers installed in my home theater. I wish to control these subwoofers through the Ethernet Port so I need the IP Database. Upon Contacting Velodyne they Give me this information

"Static Ip: 192.168.1.253 port: 51234, All the RS232 serial commands can be used for the IP control."

The Problem is all the three subwoofers have the same IP. And I am not able to find a way to change their IPs. Can anybody help in this direction.

I have tried telnet at port 51234 but There are only two commands Status and Pause.

Regards,

Rohit Bhargava
Post 2 made on Saturday May 16, 2020 at 18:38
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
I know there was Windows software available to setup the plus series. Have you tried that? If there’s no settings in there, I’m not sure anything was officially implemented.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse