Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
POE switch with PDU features like scheduled rebooting and staggered port rebooting ?
This thread has 1 response. Displaying all posts.
Post 1 made on Monday March 5, 2018 at 08:10
james_aa
Regular Member
Joined:
Posts:
January 2018
84
Dose anyone know of some gigabit copper POE switches that provide PDU features like port staggering, scheduled rebooting, device pining to see if a device is still up and if not reboot the POE port ?

Normally we use Netgear and TP Links smart switches, but open to others.
Post 2 made on Monday March 5, 2018 at 23:49
sbarnesvta
Junior Member
Joined:
Posts:
September 2016
3
I have never seen a switch with those features built in, typically there is some type of control or monitors device that will do it. You can probably get creative with a raspberry pi or something similar if you have the time and know how.

Something like Domotz https://www.domotz.com will do what you need out of the box as long as your specific switch is supported. I have been using it for quite a while now and it works great.
sbts-inc.com
- Certified Crestron Programmer
- RTI Programmer/ Driver Developer

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse