|Post 1 made on Monday May 15, 2017 at 23:54|
I'm trying to get RS232 enabled on a Sharp PNV601A display but have been having no luck when testing out the commands.
Commands I'm trying to get working are the power on and off commands. Ive tried out the following commands on docklight but get no results.
Power on: POWR 1 / 50 4F 57 52 20 20 31 0D
Power off: POWR 0/ 50 4F 57 52 20 20 30 0D
Commands were tried out with a cross over and straight through cable.
Also just to add i find it strange that i don't get any replies back from docklight.
Ive checked and confirmed onscreen settings on enable RS232, do sharp screens give replies back when commands are sent ?
|Post 2 made on Tuesday May 23, 2017 at 17:41 |
When you connect to the unit from your laptop, do those commands turn the TV on and Off?
"Quality isn't expensive, it's Priceless!"
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.