Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Sharp PNV601A RS232 Commands
This thread has 1 response. Displaying all posts.
Post 1 made on Monday May 15, 2017 at 23:54
Linnix
Junior Member
Joined:
Posts:
May 2017
1
Hi,

I'm trying to get RS232 enabled on a Sharp PNV601A display but have been having no luck when testing out the commands.

Commands I'm trying to get working are the power on and off commands. Ive tried out the following commands on docklight but get no results.

Power on: POWR 1 / 50 4F 57 52 20 20 31 0D
Power off: POWR 0/ 50 4F 57 52 20 20 30 0D

Commands were tried out with a cross over and straight through cable.

Also just to add i find it strange that i don't get any replies back from docklight.
Ive checked and confirmed onscreen settings on enable RS232, do sharp screens give replies back when commands are sent ?

Thanks
Post 2 made on Tuesday May 23, 2017 at 17:41
kgossen
Super Member
Joined:
Posts:
March 2008
2,852
When you connect to the unit from your laptop, do those commands turn the TV on and Off?
"Quality isn't expensive, it's Priceless!"

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse