Post 1 made on Monday January 16, 2017 at 14:27 |
I am about to get an IOGear ghsw8181 HDMI switcher in the next few days so I'm getting things ready to implement it into my setup.
I found a list of commands for RS232 control of this device in a several year old PDF on IOGear's website. It has commands to select the input and turn power on detection on and off. The remote included with the unit has discrete power on and off buttons and I was wondering if anyone has found the RS232 command equivalent for this?
I will also be contacting IOGear but figured I would cover all of my bases.
|
|
OP | Post 2 made on Wednesday January 18, 2017 at 00:53 |
I haven't gotten my switch yet but I do have a reply from IOGEAR. According to them, this is the same unit as their parent company Aten's VS0801H switch.
They provided documentation that details quite a bit for RS232 control. It turns out that the discrete power is only to power the output port and not the entire unit which still works perfect for my needs.
The codes are simply "sw on" and "sw off". I am still awaiting the arrival of my unit so I can verify if this works or not. I will provide an update with my findings.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.