| Post 1 made on Wednesday July 29, 2009 at 21:09 |
Fiasco Senior Member |
Joined:
Posts: | July 2009
1,276 |
|
|
I have the HR20-100 and the Iogear GUC232A usb to serial adapter.
I plugged the IOGear into the back of my HR20 with the other end attached to the serial port on my laptop.
I have my serial port set at 9600 8 data no parity 1 stop bit no flow control and I am getting nothing.
I have the DirecTV Control v 1.82 which doesn't work as well as a serial port terminal.
|
Pump House on Facebook: [Link: facebook.com] |
|
| Post 2 made on Wednesday July 29, 2009 at 21:15 |
Don O'Brien Long Time Member |
Joined:
Posts: | August 2002
237 |
|
|
Unplug the power from the dvr, connect IOgear usb to serial adapter, plug in dvr, attach pc serial port to IOgear.
Joy!!!
|
|
| OP | Post 3 made on Tuesday August 4, 2009 at 01:29 |
Fiasco Senior Member |
Joined:
Posts: | July 2009
1,276 |
|
|
Required a null modem adapter. I used a jumper wire to cross #2 and #3 and it started working.
Thanks!
|
Pump House on Facebook: [Link: facebook.com] |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
