| Post 1 made on Friday April 15, 2016 at 00:21 |
Hi All,
I need to control a Yamaha CD-C600 5 Disc Carousel CD Player.
After many months i have finally received the 232 Protocol from Yamaha.
I have the "codes"
Deciphering the manual to get the codes into a usable string is another thing.
hope someone can help
i can send the manual if you can decode it
thanks in advance
Paul
|
|
| Post 2 made on Saturday April 16, 2016 at 09:59 |
buzz Super Member |
Joined:
Posts: | May 2003
4,376 |
|
|
Which control system are you using? For RS-232 all you need is to send the command string of characters to the device. I have never used the CD-600, but the older Yamaha's require that a jumper is installed between pins 7-8 at the player end.
|
|
| OP | Post 3 made on Saturday April 16, 2016 at 20:57 |
The player has 232 on/off in it's menu.
I want to control it with a Crestron unit just using one way serial.
I have d/l'ed a module from Crestron but it doesn't work. I have opened the module but i have yet to compare the code with the one Yamaha sent me.
I am definitely getting return data though from the Yamaha when i manually switch the unit on.
|
|
| Post 4 made on Thursday December 8, 2016 at 16:57 |
epereira266 Lurking Member |
Joined:
Posts: | December 2016
1 |
|
|
Hey man, did you happen to create a module for this? Im using a crestron processor to control the same box. wanted to see if you had anything for it?
|
Thanks |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
