| Post 1 made on Friday January 8, 2016 at 19:29 |
MACHSYSTEMS Lurking Member |
Joined:
Posts: | January 2016
5 |
|
|
I am controlling a YAMAHA BD-A1040 Bluray player via Crestron. All my commands are working flawless except for "power on". I'm using a Crestron module that was originally created for the BD-A1010. It seems to be working fine except for the "power on" issue. I've also tried bypassing the module and sending the command string \x0207CF60\x03 via SIO. Still can't get it to work. Anyone out there have any suggestions. It would be much appreciated.
|
|
| Post 2 made on Saturday January 9, 2016 at 16:31 |
kgossen Super Member |
Joined:
Posts: | March 2008
3,026 |
|
|
Have you tried sending the code twice? I have an Elite AVR and when it's asleep, I need to send the RS232 "on" command twice with a .1 second delay. First one wakes it up and second turns it on.
|
"Quality isn't expensive, it's Priceless!" |
|
| OP | Post 3 made on Saturday January 9, 2016 at 21:03 |
MACHSYSTEMS Lurking Member |
Joined:
Posts: | January 2016
5 |
|
|
Sadly yes. I too have run across that same issue with a different player in the past. Didn't work this time. Thanks though.
|
|
| OP | Post 4 made on Sunday January 10, 2016 at 09:17 |
MACHSYSTEMS Lurking Member |
Joined:
Posts: | January 2016
5 |
|
|
You know come to think of it. My delay was .2 not .1. I wonder if that would make the difference?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
