Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Can i use one serial port to control 2 devices?
This thread has 2 replies. Displaying all posts.
Post 1 made on Tuesday July 21, 2009 at 06:50
danieljgor
Long Time Member
Joined:
Posts:
December 2008
105
Hi Guy's

i have a pronto serial extender, can i use one output to control 2 devices at different time? in other word make a 2 to 1 cable.

Thanks daniel
Post 2 made on Tuesday July 21, 2009 at 11:23
doglife
Long Time Member
Joined:
Posts:
December 2002
54
I dont know if this will help but here is a link:
[Link: avocationsystems.com]
Technology pushes technology, not people
Post 3 made on Tuesday July 21, 2009 at 19:33
sydinstaller
Active Member
Joined:
Posts:
February 2004
740
If all port setting are the same and the programming allows more than 1 device on a com port then this should work

[Link: xantech.com]

D


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse