Post 1 made on Sunday October 13, 2013 at 05:01 |
msasa Lurking Member |
Joined: Posts: | January 2011 2 |
|
|
Any help appreciated !
I have tried for days to control an ADA Cinema rapture via its ADA bus port ( pin 1= ground / pin 2 RX / Pin 3 tx ) - this is connected via phoenix connector to an RJ45 that is connected to an RTI XP 3 RS232 port . i have tried swapping pin 2/3 around .
Ada rs 232 codes for vol up are : FF,03,00,01,5A,5E,FF
Within the Rti program i have pasted this code and tried various carriage returns within the Rti program with no luck .
Would appreciate any tips.
|
|
Post 2 made on Monday October 14, 2013 at 06:44 |
Diskreet Long Time Member |
Joined: Posts: | February 2011 225 |
|
|
Your pinout is correct
for the command remove the comma's
FF 03 00 01 5A 5E FF
When pasting into RTI, make sure you have pressed the "Hex" button before you paste in the command.
|
The Future's Bright, The Future's Controllable. |
|
OP | Post 3 made on Monday October 14, 2013 at 15:43 |
msasa Lurking Member |
Joined: Posts: | January 2011 2 |
|
|
thanks very much i eventually got there .
|
|
Post 4 made on Wednesday August 6, 2014 at 04:36 |
jeevan.peraka Lurking Member |
Joined: Posts: | August 2014 1 |
|
|
Hi,
I need to controll ADA Cinema Rapture using AMX controller.
Could you please provide me RS 232 or IR files for the same.
|
JK |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.