Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Elite Pro 70X5FD deaf to MSC-400 RS232
This thread has 1 response. Displaying all posts.
Post 1 made on Monday October 8, 2012 at 10:37
malibu1
Lurking Member
Joined:
Posts:
October 2012
5
Have serial control from MSC-400 to Elite Pro 70X5FD TV and a Denon AVR.
Denon RS232 control works perfectly but the TV won’t respond to the RS232 commands from the MCS-400.

TV will respond to commands sent from laptop using Hyperterminal.
Connected MSC cable to Hyperterminal and see the correct commands being sent by the MSC-400.
Triple checked the port settings to be 9600, N,8,1.
Have null modem on TV as required by Sharp.
Switched the Denon cable to the TV port and connected it to the TV, no response from TV.
Reprogrammed and switched TV and Denon serial ports on the MSC-400 and still no response from TV.

Any suggestion for what to try next?
Post 2 made on Monday October 15, 2012 at 16:28
NSP01
Advanced Member
Joined:
Posts:
March 2005
834
If I remember correctly you should manually enter the carriage return and line feed rather than using the check box.
That worked with Pioneer plasma.
They call me the "Thread Killer". Just watch!

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse