Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
RS-232 Codes for Denon DBP-2010CI Blu-ray Player
This thread has 24 replies. Displaying posts 16 through 25.
Post 16 made on Wednesday January 11, 2012 at 12:20
M Hi Fi
Active Member
Joined:
Posts:
August 2008
672
On January 11, 2012 at 11:45, cpacheco said...
Hello Matt,
I am looking for the RS-232 codes for the AVR-4311CI Receiver. Could you help me?
Do you know if this receiver can be controlled via Ethernet?

Thanks for your time.

It supports both IP/232. I'm at CES this week and will have limited access to my computer. Email me and I can get it out to you when I am back in my office.
Post 17 made on Friday January 13, 2012 at 17:10
M Hi Fi
Active Member
Joined:
Posts:
August 2008
672
I tried to send an email with the requested file to the address listed in your profile and it was bounced back. If you still are in need, please email me and I will send it to you.

On January 11, 2012 at 11:45, cpacheco said...
Hello Matt,
I am looking for the RS-232 codes for the AVR-4311CI Receiver. Could you help me?
Do you know if this receiver can be controlled via Ethernet?

Thanks for your time.
Post 18 made on Monday January 23, 2012 at 15:18
sWORDs
Long Time Member
Joined:
Posts:
November 2006
373
Current Receivers:
AVR2112CI/AVR1912
AVR2312CI
AVR3312CI
AVR4311CI
AVR5308(A)CI/AVCA1HD(A)

Last edited by sWORDs on January 23, 2012 15:38.
Post 19 made on Monday January 23, 2012 at 15:48
sWORDs
Long Time Member
Joined:
Posts:
November 2006
373
Post 20 made on Thursday January 26, 2012 at 07:16
VladaPUB
Long Time Member
Joined:
Posts:
August 2008
20
Great ! Thank you for help !
Let's make it easy - www.bugandbug.com :)
Post 21 made on Saturday August 25, 2012 at 18:24
mcgroovie
Lurking Member
Joined:
Posts:
August 2012
1
I was looking to try to get some commands tested for the DBP-2012UDCI, really just looking for "power on" "play" an "stop". But if i had one or two I believe I could figure out a few more.

This is for an elan system i believe I have the right settings for the serial
Baud Rate 9600
Flow Control none
Parity Even
Data Bits 8
Stop Bits 1
As for the command I have a place for ASCII that will fill out the hex when I type it in.
the terminator can be "None" "Carriage Return" "Linefeed" or "Carriage Return + Linefeed"
Any help would be very much appreciated.
Thank you in advance.
Post 22 made on Friday August 31, 2012 at 06:22
Oz AVI
Senior Member
Joined:
Posts:
November 2004
1,151
Try These

Power On 02 20 00 00 00 00 00 03 32 33
Power Off 02 21 00 00 00 00 00 03 32 34
Play 02 40 00 00 00 00 00 03 34 33
Stop 02 41 00 00 00 00 00 03 34 34
Post 23 made on Wednesday February 13, 2013 at 14:10
wss7932
Lurking Member
Joined:
Posts:
February 2013
1
Can I get the codes for the Denon DBP-2012 from you?
Wesley Smith
Broadcast Works!
Post 24 made on Tuesday March 26, 2013 at 22:50
GBLD
Lurking Member
Joined:
Posts:
March 2013
1
Hi Matt,
I'm looking to control my DBP2012-UD with IP commands. If you could pass on a programming guide, it would be much appreciated.

[email protected]

thanks,
Greg
Post 25 made on Saturday June 8, 2013 at 16:08
solucionsbcn
Lurking Member
Joined:
Posts:
June 2013
1
URGENT!!! Help needed. I need to control a Denon DBP-2012UD though RS-232 or Ethernet. I'm receiving the status messages from the Player through RS-232 but I have no response.

Do I need to send any initialize command?
There is any hidden configuration menu?
Can I control it through the Ethernet port?

Thank's in advance!
Solucions BCN
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse