| Post 1 made on Friday August 19, 2011 at 06:09 |
ajkush Lurking Member |
Joined:
Posts: | August 2011
2 |
|
|
Commands are working fine with USB- Serial cable and HDMI responding to the laptop when i am sending command with terminal. But when i connected my HDMI with serial to serial cable(NULL MODEM CABLE) it again stop responding. Cable is fine because i am using same cable with Projector to send command and projector is working fine.So please suggest me weather i have to change to other type of cable or install any software or how can i resolve this issue now.Please suggest me if null modem cable is not working then how can i communicate with HDMI.
|
|
|
| Post 2 made on Friday August 19, 2011 at 21:39 |
fixitnick Active Member |
Joined:
Posts: | November 2010
710 |
|
|
Sound like a difference in pinout from your USB to serial adapter and serial port on your control device.
You should also turn off HDMI control on your TV, projector and other devices.
|
I keep pointing my remote at the turntable but, it never advances to the next track. |
|
| Post 3 made on Thursday August 25, 2011 at 16:40 |
VladaPUB Long Time Member |
Joined:
Posts: | August 2008
20 |
|
|
1. Check do you need to enable serial port on device
2. Check baudrate
3. Check pinout (this first!)
It will work for sure !
|
Let's make it easy - www.bugandbug.com :) |
|
| OP | Post 4 made on Friday August 26, 2011 at 10:40 |
ajkush Lurking Member |
Joined:
Posts: | August 2011
2 |
|
|
Hi
Yes i changed the RS-232 cable and its working fine with other cable which is not a null modem cable. Their was no setting to turn on. Thanks guys.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
