Post 1 made on Monday May 23, 2011 at 14:59 |
Ranger Home Super Member |
Joined: Posts: | June 2007 3,486 |
|
|
Have amp connected via rs-232 for the DTR-70.2. Using MSC-400 and dont see the code to input to PC.
Anyone know where I can find this? There are many codes in the URC database but dont see the PC input. Am I crosseyed?
Thanks!
|
|
Post 2 made on Monday May 23, 2011 at 15:50 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
I don't think you will find anything labeled PC input in any of the protocols. Try switching the last 2 characters of the string. they start at 00 for video 1, 01 for video 2, etc.
eventually you should find the proper two characters for PC. Looking at the manual, the default input for PC is HDMI 5. I would try 04 for the last two characters and see if that works.
so the string would be: !1SLI04
|
|
|
Post 3 made on Monday May 23, 2011 at 15:56 |
Darth Remote Long Time Member |
Joined: Posts: | December 2009 193 |
|
|
I believe the correct command for the PC input is !1SLI05 with either a carriage return or line feed to terminate it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.