Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Pioneer KRL37-V Power On
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday March 15, 2011 at 11:41
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
Hi guys trying to control a pioneer tv via rs232 and all is well but for some reason cannot turn the damm thing on !

The power off command is

POWR0 \r\n (with 3 blank's before carriage return)

but have tried all variants of the above to no success to turning it on.

tried all the other commands to see if any will turn it on but nothing, everything works fine when the tv is on, its just getting it on which seems the hardest part.

Anybody worked with this model or know of the power on command ?

Many Thanks
The Future's Bright, The Future's Controllable.
OP | Post 2 made on Tuesday March 15, 2011 at 12:27
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
please ignore, problem solved.
The Future's Bright, The Future's Controllable.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse