Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Popcorn Hour A-110 IP Commands ?
This thread has 5 replies. Displaying all posts.
Post 1 made on Wednesday February 23, 2011 at 04:05
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
Does anyone know if there is a IP command list for The popcorn hour a-110 ? it must be IP controllable because I can do it from a webrowser on my iPhone but wondered if any body had a list of the commands ? I'm not looking for full meta data and two way control, just basic functions as found on the remote control.

Many thanks in advance
The Future's Bright, The Future's Controllable.
Post 2 made on Wednesday February 23, 2011 at 08:30
vbova27
Super Member
Joined:
Posts:
July 2006
2,987
Here are some:

BTPD Bit Torrent client: [Link: IP-Address]

Transmission: [Link: IP-Address]

Transmission 1.51 (if installed separately): [Link: IP-Address]

NZBGet (Usenet client): [Link: IP-Address]

MyiHome: [Link: IP-Address]

Casgle iDVR: [Link: IP-Address]

Home: [Link: IP-Address]

Preferences: [Link: IP-Address]

Audio/Video: [Link: IP-Address]

Network Share: [Link: IP-Address]

Network: [Link: IP-Address]

NMT Applications: [Link: IP-Address]

DVD/Audio CD: [Link: IP-Address]

Maintenance: [Link: IP-Address]

Vincent
OP | Post 3 made on Thursday February 24, 2011 at 05:25
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
Many thanks Vincent,

very helpful, I'm looking to attempt to install Telnet onto a Popcorn Hour A-110, have you tried or done this ? Just wondering if it causes any problems i should be aware of before going ahead with it.

Thanks again
The Future's Bright, The Future's Controllable.
Post 4 made on Thursday February 24, 2011 at 08:48
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,780
Incidentally, if you want to make Vincent's links a lot easier to read, click on the yellow post number in the upper left corner, then the red "View Code" button at the bottom of the message.
Post 5 made on Thursday February 24, 2011 at 11:01
vbova27
Super Member
Joined:
Posts:
July 2006
2,987
Thanks Daniel, I apologize for the hard to read information. I have not installed telnet on any on the field, but after reading up a bit on the subject I don't see how it could cause any issues. This is a pretty cooperative piece of equipment and I have seen some creative things done over the years.
OP | Post 6 made on Thursday February 24, 2011 at 12:05
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
Thank you again Vincent, and thank you Dan, didn't realise that was possible on the forums, did make things a lot easier =) thanks again.
The Future's Bright, The Future's Controllable.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse