Your Universal Remote Control Center
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Elite BDP-41FD IP control
This thread has 1 response. Displaying all posts.
Post 1 made on Monday January 24, 2011 at 23:22
Long Time Member
November 2006
I have a Pioneer unit and want to control it using IP. I got the protocol and it specifies port #8102, the IP address I set to with mask and gateway

With these settings I have not able to control anything. I am not able to even connect to the port. So I know the port is wrong. I tried 23, 80 but no joy.

I will be sending Power ON command /A181AFBA/R.

Need help to finish installation. Thank you in advance.
Post 2 made on Wednesday January 26, 2011 at 10:57
Advanced Member
March 2005
IP and RS-232 control will be activated when the new firmware upgrade is available. That is supposed to be within the next two weeks. DLNA should become active as well.
There is a note about the upgrade on the product sheets for the 3-D models though it is specific to the iControlAV iPhone app.
They call me the "Thread Killer". Just watch!

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse