Hi,
I'm looking for 1 way RS-232 codes for HAI controllers. I'm trying to add a few functions to a Nevo Q50 and an RTI T2C. I just want to arm, disarm, and a few other simple actions. I know Worthington has a file that they will provide if you buy from them but I don't need 90% of what they have set up. Any help would be appreciated.
Thanks,
Jon

Easy
Create some messages on the HAI for ARM, Disarm or anything else you want the HAI to do.

Then create some programs on the HAI to do those commands when it receives those messages.

Finally create your remote commands to send out the
exact same strings as your messages to the HAI.


the only real down side is of course there is no pass code needed for disarm but you can fake it on RTI by creating a few pages with a keypad on them, if they hit the correct first number it page flips to the next page if not it page flips to an identical page that does not have have any commands just keep doing that for all four digits on the final "correct" page the final digit of the passcode is what passes the string to the HAI

Thanks for the tip. I set up messages. Set up programming that Commands upon received message, configured for Prolink on the OmniproII, and then fought through a stupid cable problem. It all works now though. Pretty easy to program for 1 way control.

Thanks again,
Jon