|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Any one found the IP controls for Samsung or Sony or Panasonic or LG This thread has 32 replies. Displaying posts 16 through 30. |
|
| Post 16 made on Tuesday November 2, 2010 at 02:01 |
HiFidel Long Time Member |
Joined:
Posts: | July 2005
165 |
|
|
On September 13, 2010 at 15:35, gopronto said...
I got a reply from Samsung at long last.
There reply was" this information is commercially sensitive" so cannot be released .
Samsung GET A LIFE!
I have never dealt with a company that has been so difficult to get support from.
Still have 2 unresolved issues so im guessing there take another 3 months :( Word. On the phone for a full hour and having to supply proof of purchase to get the 232 protocol for the commercial LCDs. I'm looking for series 7 IP control too, good luck.
|
|
| OP | Post 17 made on Tuesday November 2, 2010 at 14:42 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
Im still not hving any luck getting the ip codes even from samsung in Tiwan,
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| OP | Post 18 made on Tuesday November 23, 2010 at 03:32 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
|
| Post 19 made on Tuesday November 23, 2010 at 14:20 |
FASTLs Long Time Member |
Joined:
Posts: | October 2004
480 |
|
|
A@V& has the RS232 codes if that helps. I talked to Samsung at CEDIA Expo and they were surprised they have not been distributed out.
FASTLS
|
|
| OP | Post 20 made on Tuesday November 23, 2010 at 14:44 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
On November 23, 2010 at 14:20, FASTLs said...
A@V& has the RS232 codes if that helps. I talked to Samsung at CEDIA Expo and they were surprised they have not been distributed out.
FASTLS I spoke to samsung in Tiwan and was shocked to here them say they would not be releasing them for public use :(
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| Post 21 made on Wednesday December 1, 2010 at 17:41 |
FASTLs Long Time Member |
Joined:
Posts: | October 2004
480 |
|
|
I had them (RS232) sent to me already from AVAD
FASTLS
|
|
| Post 22 made on Tuesday December 7, 2010 at 04:19 |
bcall Lurking Member |
Joined:
Posts: | December 2010
4 |
|
|
Has anyone tried the rs232 codes? I have them working over ip using an itach serial to ip adapter. The only problem is that the power on code doesn't work unless you send it immediately after powering off. It seems that the tv shuts down power to the port while in standby mode. Who's the genius that came up with that idea!
Does anyone know of a fix for this? If I have to use ir to turn the tv on, then it kind of defeats the purpose.
I've turn off power saving mode in the regular menu. And I don't see anything relating to power saving in the service menu.
Btw- I have a un55b8500
|
|
| Post 23 made on Wednesday December 15, 2010 at 15:12 |
On December 7, 2010 at 04:19, bcall said...
Has anyone tried the rs232 codes? I have them working over ip using an itach serial to ip adapter. The only problem is that the power on code doesn't work unless you send it immediately after powering off. It seems that the tv shuts down power to the port while in standby mode. Who's the genius that came up with that idea!
Does anyone know of a fix for this? If I have to use ir to turn the tv on, then it kind of defeats the purpose.
I've turn off power saving mode in the regular menu. And I don't see anything relating to power saving in the service menu.
Btw- I have a un55b8500 Which port did you use for the iTach? Thanks-
|
|
| OP | Post 24 made on Monday January 17, 2011 at 13:20 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
Hi all, any one had any luck trying to communicate to a Samsung Via IP yet?
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| OP | Post 25 made on Thursday February 24, 2011 at 19:09 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
is there anyone trying to capture codes via wire shark , have got some data, anyone else trying? :)
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| Post 26 made on Sunday February 27, 2011 at 11:15 |
Proggieus Long Time Member |
Joined:
Posts: | October 2005
434 |
|
|
I have captured some of the traffic, however it looks like it is setting up a UPnP connection. http://en.wikipedia.org/wiki/Universal_Plug_and_Play#DescriptionAs far as i can tell there are no strings that you can just send the TV for control. At a minimum you will need to create a UPnP control point in your programming. I will try to spend a little more time with it later today to see if i can reuse the packets from an established UPnP connection without renegotiating a new connection.
|
|
| Post 27 made on Sunday February 27, 2011 at 19:08 |
Proggieus Long Time Member |
Joined:
Posts: | October 2005
434 |
|
|
well as of now it looks like this is a dead end, The TV shuts off its ethernet adaptor when the TV powers down. As far as i can tell there would be no way to turn it back on without IR
|
|
| OP | Post 28 made on Thursday March 24, 2011 at 05:15 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
OK gave up on samsung so got on the phone to Sony, 5th tech later i found some one who knew what i was talking about , and you guessed it there are no codes for sony either... :(
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| OP | Post 29 made on Thursday March 24, 2011 at 05:22 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
|
| Post 30 made on Sunday March 27, 2011 at 22:34 |
Proggieus Long Time Member |
Joined:
Posts: | October 2005
434 |
|
|
it's still a dead end until Samsung leaves the ethernet port active in standby mode.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
