| Post 1 made on Friday April 10, 2009 at 19:05 |
acucu Junior Member |
Joined:
Posts: | March 2009
28 |
|
|
having issues control yamaha rxv3800 thru serial connection msc400
using ccp program to configure tested codes directly no luck
what am i missing?>
|
SA |
|
| Post 2 made on Friday September 25, 2009 at 00:57 |
|
Forget RS232 with Yamaha. If you don't need to process the RS232 feedback. Just use the rear IR in, it works flawlessly every time.
|
|
|
| Post 3 made on Friday September 25, 2009 at 10:39 |
snarfshark Regular Member |
Joined:
Posts: | November 2006
214 |
|
|
Make sure you are using a null modem cable. Troubleshoot the connection by using a com port on your PC to connect to the rcvr. Use a comm program on the PC to send the command strings.
Also, make sure that you remove the extra "\" character from the RS232 command strings in the URC database. Most of the devices in the database which have ASCII command strings containing unprintable characters have the extra "\" character.
For example, power on command for Yammy RX-V1900 is listed in the database as "\\x0207E7E\\x03, it should be "\x0207E7E\x03".
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
