Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 3 of 3
Topic:
Sirius SCH2P RS232 Control Protocol?
This thread has 40 replies. Displaying posts 31 through 41.
Post 31 made on Friday April 5, 2013 at 18:28
flagator
Lurking Member
Joined:
Posts:
April 2013
1
I sure as heck don't want to wait for Sirius to give me the protocol. I have the 1.0 protocol and am about to design a controller for the SXV200. I want to make sure the few features I'm dealing with haven't changed. How can I get the 2.0 protocol doc?
OP | Post 32 made on Saturday April 6, 2013 at 10:43
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,682
I only have the 1.something protocol.  I think it is 1.06
[Link: facebook.com]
Post 33 made on Wednesday March 26, 2014 at 05:19
JosephCenxudong
Junior Member
Joined:
Posts:
March 2014
1
I am finding the protocol between controller and SXV200 now, Who can mail me one, I am appreciate of that.
cenxudong
Post 34 made on Friday December 5, 2014 at 14:39
AVTG
Junior Member
Joined:
Posts:
December 2014
1
Did anybody ever get this info and interested in sharing.
Post 35 made on Saturday December 20, 2014 at 11:40
Barry Gordon
Founding Member
Joined:
Posts:
August 2001
2,108
see earlier post this thread by me.
Post 36 made on Saturday October 17, 2015 at 17:21
j3k3m3
Junior Member
Joined:
Posts:
October 2015
2
Hey! I'm a home automation integrator. I'm looking to get an sch2p sirius radio to work with an hai/leviton system. Could someone reply with the sirius xm protocol info? Is this just a long list of 232 commands? I understand they are saying its two way communication but i guess im wondering why?

Thank!

Jonathan
Post 37 made on Thursday October 29, 2015 at 09:46
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
On October 17, 2015 at 17:21, j3k3m3 said...
I understand they are saying its two way communication but i guess im wondering why?

If it's not 2-way, how do you know what's playing or what to select? If you have to go to the unit to make your music choice, why integrate?
"Quality isn't expensive, it's Priceless!"
Post 38 made on Saturday November 14, 2015 at 15:52
Barry Gordon
Founding Member
Joined:
Posts:
August 2001
2,108
The Sirius SCH2P RS232 protocol is two way. My SCH2P Is connected to my AVP. When I command the AVP (over RS232) to connect to the Sirius Radio input port, it turns on the Sirius Radio using a 12 volt trigger. From that point forward I can completely control the Sirius radio with full feedback as to status and what is playing. This is done over RS232 coming from a PC that controls the Theater or from an iPad that controls all my home Automation. The iPad talks to the PC controlling the theater over TCP which is controlling the Sirius SCH2P.
Post 39 made on Thursday February 4, 2016 at 08:55
timgray
Lurking Member
Joined:
Posts:
May 2008
1
Anyone still have the protocol document? Sirius XM refuses to give it to me and simply repeats, "use the Crestron/AMX module"
OP | Post 40 made on Monday February 8, 2016 at 08:42
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,682
knock yourselves out  :)

[Link: dropbox.com]
[Link: facebook.com]
Post 41 made on Monday July 24, 2017 at 20:35
jorandal
Junior Member
Joined:
Posts:
July 2017
1
Hello all, I'm new on here but this thread has been very interesting to me although there is less activity lately. I'm curious to see if anyone has any information on the new protocol that sirius is using. I have figured out most of the formatting for my basic needs but not the checksum part and it seems completely different from the documentation relating to v1.0.7. I see mention from "JosephCenxudong" that the svx200 may have been using this protocol as well I am using a svx300 personally and can confirm it is new. I've looked on Barry Gordans' download section and it appears that unless I missed it all of the documentation was for the version 1 protocol. Has anyone else had any luck getting the documentation or figuring out the checksum on the new protocol?
Page 3 of 3


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse