|
|
|
The following page was printed from RemoteCentral.com:
Sirius SCH2P RS232 Control Protocol?
| |
|
Topic: | Sirius SCH2P RS232 Control Protocol? This thread has 40 replies. Displaying posts 1 through 15. |
|
Post 1 made on Monday March 22, 2010 at 09:28 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
Edit: here you go [Link: dropbox.com]Does anyone have this protocol? This is what it says on Sirius's site: RS232 Control:- Driver modules are available for most control systems, including AMX, Crestron, and NetStreams. The protocol can also be provided to approved integrators for custom development. You can request a protocol licensing agreement by e-mailing [email protected]. Please note that implementation of the RS232 control protocol requires two-way communication with the host controller.
Has anyone jumped through this hoop and made it to the other side? Want to share the treasured info? I am trying to write a module for the new Nevostudiopro 3.0 software. I sent a request email, but I'm guessing that they will only give it to companies that build the products that would interface with their tuner. (crestron, amx, etc)Update: If anyone is interested in this protocol, someone posted it on the IP Forum. You can download it there.
Last edited by Duct Tape on February 8, 2016 08:43.
|
|
|
Post 2 made on Tuesday April 6, 2010 at 15:01 |
iointerrupt Lurking Member |
|
|
Any chance of getting it outside of IP? Or your Nevostudio Pro module?
I got some custom software I'm interested in writing for it for my own usage.
Thanks.
|
|
Post 3 made on Friday July 16, 2010 at 15:24 |
jimmypopali69 Long Time Member |
Joined: Posts: | November 2007 13 |
|
|
the IP forum? I cant find the post you are referring to. Could you PM me the data?
|
|
OP | Post 4 made on Saturday July 17, 2010 at 08:34 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
|
Post 5 made on Sunday August 15, 2010 at 10:07 |
deb1919 Founding Member |
Joined: Posts: | September 2001 344 |
|
|
I could really use that link too, if possible. TIA. On July 16, 2010 at 15:24, jimmypopali69 said...
the IP forum? I cant find the post you are referring to. Could you PM me the data?
|
|
OP | Post 6 made on Sunday August 15, 2010 at 12:15 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
On August 15, 2010 at 10:07, deb1919 said...
I could really use that link too, if possible. TIA. sent you an email
|
|
|
Post 7 made on Saturday September 18, 2010 at 15:46 |
arctic_audio Lurking Member |
Joined: Posts: | September 2010 1 |
|
|
I could also really use this info. Thanks!
|
|
OP | Post 8 made on Saturday September 18, 2010 at 16:06 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
On September 18, 2010 at 15:46, arctic_audio said...
I could also really use this info. Thanks! you have a PM
|
|
|
Post 9 made on Monday September 20, 2010 at 01:49 |
wall-e Long Time Member |
Joined: Posts: | September 2008 55 |
|
|
I also am interested in getting the protocol!
|
|
Post 10 made on Wednesday March 2, 2011 at 19:24 |
Hi there,
I've been in a 3 week holding pattern to get the Protocol from SiriusXM, and I am running out of time! Do you happen to have the protocol handy that you can send me?
Thanks!
-Ryan
|
|
OP | Post 11 made on Thursday March 3, 2011 at 08:08 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
|
Post 12 made on Monday April 25, 2011 at 16:56 |
Hi. I am working on a project and need this information. Could you please send me the control protocol? I am also looking for a programming to assist on this issue. If anyone interested, please contact me as well. Thanks! Kaede On March 22, 2010 at 09:28, Duct Tape said...
Does anyone have this protocol? This is what it says on Sirius's site: RS232 Control:- Driver modules are available for most control systems, including AMX, Crestron, and NetStreams. The protocol can also be provided to approved integrators for custom development. You can request a protocol licensing agreement by e-mailing [email protected]. Please note that implementation of the RS232 control protocol requires two-way communication with the host controller.
Has anyone jumped through this hoop and made it to the other side? Want to share the treasured info? I am trying to write a module for the new Nevostudiopro 3.0 software. I sent a request email, but I'm guessing that they will only give it to companies that build the products that would interface with their tuner. (crestron, amx, etc)Update: If anyone is interested in this protocol, someone posted it on the IP Forum. You can download it there.
|
|
OP | Post 13 made on Tuesday April 26, 2011 at 13:40 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
|
Post 14 made on Sunday May 1, 2011 at 08:37 |
Can I get a copy of the protocol?
Thanks,
|
Kevin WD4RAT |
|
Post 15 made on Wednesday September 7, 2011 at 15:44 |
sank Lurking Member |
Joined: Posts: | September 2011 2 |
|
|
Duct Tape, I am in need of documentation as well.
Thanks,
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|