| Post 1 made on Monday March 16, 2009 at 14:26 |
Hi guys,
I would like to operate my Lexicon MC8 with a Philips TSU 9800 and the RXF9600. Does anybody have a working xcf file?
Thanks in advance.
|
|
| OP | Post 2 made on Monday March 23, 2009 at 12:45 |
I am not after a 2-way communication, just need to send the commands out. I am not sure how to insert the commands correctly into the RFX9600, to be honest.
As an example, the manual has the following table (power on):
Application Header:
Command DC_WAKEUP 0x01
Data Count 0 0x00
Application Data:
N/A
Can anybody help?
|
|
| Post 3 made on Tuesday March 24, 2009 at 16:12 |
Bruce Sinclair Active Member |
Joined:
Posts: | April 2003
694 |
|
|
F1 04 14 01 18 F2 turns the power on, these are hex codes, depending on how the processor likes to see these expressed wiil dictate how you need to write them. The foloowing examples are different ways to express the same string
\xF1\x04\x14\x01\x18\xF2
F1h 04h 14h 01h 18h F2h
$f1 $04 $14 $01 $18 $F2
baud rate is 19200 8 1 n female to femal DB-9 straight thru 2 3 5
|
Bruce Sinclair CMB Integrations LLC DMC-E
"Those who are most critical, often have no real skills themsevles" |
|
| OP | Post 4 made on Wednesday March 25, 2009 at 01:13 |
Thanks,
I will give it a try.
|
|
| OP | Post 5 made on Friday March 27, 2009 at 19:22 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
