Your Universal Remote Control Center
RemoteCentral.com
Lighting & Home Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Temperature Sensor with Contact Closure Output - Recommendations?
This thread has no replies.
Post 1 made on Friday April 13, 2018 at 14:56
RustyBurkeMaui
Junior Member
Joined:
Posts:
April 2016
2
Temperature Sensor with Contact Closure Output?

We have a project that we are trying to activate a rack closet exhaust fan based on temperature.

We are planning to integrate this with a Lutron QS system for monitoring and control purposes. We'll be using the Lutron HQR-15APS-1 15A Plug-in Appliance Module to activate the fan. In speaking to Lutron, they recommend using a 3rd party Temp Sensor/Thermostat with Contact Closure output wired to an existing QSE-IO CC interface to trigger this module at a specified temperature.

We do have Middle Atlantic thermostatically controlled rack fans in the rack, we are just trying to accomplish exhausting the hot air out of the closet without it having to run 24/7.

I've looked around a bit, but thought I'd post here to see if anyone has anything in particular that they've used for this application with success.

Please let me know if you have any recommendations.

Thank you,

Rusty
Rusty Burke
Horizon Systems & Design

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse