If someone could help me with this i would be eternally grateful - hasnt worked properley for a year now!

Im using a pronto 7000, the IR signals converted by a Marmitek IR7243U to control X10, lighting and blinds.

I have been through many pcf files for x10 IR codes. Most did'nt work. The only working codes I could find, required me to hold the button down for several seconds to get them to work (note increasing IR duration does not work!). This is no good for macros!

Today I managed to find All ON / OFF code on these boards, which actually worked on a single button press!!! However this will only allow me to turn everythign On or Off, and i need to be able to control differnt devices seperateley.

Here is the working **ALL ON / OFF** code:
---------------------------------------------------------------
All lights on
Device Code: -1 Function: 24
0000 0068 0000 000C 00CF 00D0 0034 0151 0034 0151 0034 0151 00B5 00B6 00B5 00B6 00B5 00B6 00B5 00B6 00B5 00B6 0034 0151 0034 0151 0254 00CF

All lights off
Device Code: -1 Function: 16
0000 0068 0000 000C 00CF 00D0 0034 0151 0034 0151 0034 0151 0034 0151 00B5 00B6 00B5 00B6 00B5 00B6 00B5 00B6 00B5 00B6 0034 0151 0254 00CF
-------------------------------------------------------------------

What I need is the codes to turn a SINGLE device number on or off, EG, 9 ON, and 9 OFF etc.... ive looked through alot of gernerated codes and they do not work.

Here is the current code I use for **9 ON** but it requires the button to be held for around 3 seconds:

9 ON:
-----------------------------------------------------------------------
0000 006B 0018 000C 00A5 0096 002E 0105 008E 0096 008E 0096 008E 0096 002E 0105 008E 0096 002E 0105 002E 0105 002E 0105 008E 0096 01CA 0096 00A5 0096 002E 0105 008E 0096 008E 0096 008E 0096 002E 0105 008E 0096 002E 0105 002E 0105 002E 0105 008E 0096 01CA 037D 00A5 0096 002E 0105 002E 0105 008E 0096 002E 0105 008E 0096 008E 0096 008E 0096 002E 0105 008E 0096 002E 0105 01CA 0DF5
--------------------------------------------------------------------------

Any help would be fantastic as at the moment im stuck for why this isnt working as it should :-(

Try this PCF. I have X-10 and use it perfectly. The code are here:

[Link: remotecentral.com]