Your Universal Remote Control Center
RemoteCentral.com
Lighting & Home Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
CM15A software
This thread has 7 replies. Displaying all posts.
Post 1 made on Wednesday June 25, 2008 at 08:15
randall2v
Lurking Member
Joined:
Posts:
May 2008
3
I am planning to bid on a CM15A WITHOUT software and would like to know
if there is a free link to download the software??
Post 2 made on Wednesday June 25, 2008 at 12:04
accessha
Long Time Member
Joined:
Posts:
May 2008
13
No, I do not believe so. When you purchase a CM15A through X-10, they send you a registration number and a link to download the ActiveHome Pro software. In order to login, you will need the registration number and the email associated with that number/device.
Access Home Automation
www.accessha.com
The Ultimate DIY Home Automation Forum
Post 3 made on Sunday October 5, 2008 at 10:22
mbarne36
Long Time Member
Joined:
Posts:
September 2008
10
sorry for the delay... just seen this. NOT TRUE. go to the Marmitek website and you can download ActiveHome Pro for free. Only works with CM15 though (i.e no CM11 serial support).
Post 4 made on Tuesday March 30, 2010 at 07:22
StarRider
Lurking Member
Joined:
Posts:
October 2002
5
I just installed Windows 7. Active Home Pro doesn't work with it. Is there any other software that will work with the CM15A?
Post 5 made on Tuesday March 30, 2010 at 12:00
rehaz1
Long Time Member
Joined:
Posts:
December 2005
490
On March 30, 2010 at 07:22, StarRider said...
I just installed Windows 7. Active Home Pro doesn't work with it. Is there any other software that will work with the CM15A?

I just installed Active Home Pro on my Windows7 PC without any problems.  What problems are your having?
Post 6 made on Tuesday April 6, 2010 at 18:05
StarRider
Lurking Member
Joined:
Posts:
October 2002
5
I called X10 and received a link to downloaded the program again, after digging up the original order and finding the order number.
The program just doesn't control the modules anymore. I don't even have the toggles on the modules in the program software to turn on and off.

Any ideas would be great!
Post 7 made on Wednesday April 7, 2010 at 18:28
StarRider
Lurking Member
Joined:
Posts:
October 2002
5
Oops, my bad. I assumed after installing the software and loading my previous setup, all would be good. I needed to redo each module in the program to what it actually is, lamp, appliance and such.
We'll see how it goes after 24 hours.
Post 8 made on Tuesday March 12, 2013 at 02:12
leo_keil
Junior Member
Joined:
Posts:
March 2013
1
After about 20 years, I'm afraid my CP-290 system running Bruce Christensen's XA - X10 Command Interpreter version 01.06 has failed. For the last year, it's been running on a Windows 7 PC. I had to install DOSBox v0.74 to run the software under Windows 7 and use at USB to serial port adapter to hook up the CP-290.

I'd like to replace the CP-290 with an ActiveHome Pro CM15A. Is there any software that will let load a command file to the CM15Ain a way similar to the way Bruce Christensen's XA lets me load the CP-290?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse