| Post 1 made on Saturday March 24, 2001 at 15:03 |
Is this the only device that you can program the pcs smartswitch with? Thanks Dave
|
|
| OP | Post 2 made on Saturday March 24, 2001 at 16:33 |
biglare Historic Forum Post |
|
|
|
| OP | Post 3 made on Saturday March 24, 2001 at 20:15 |
Larry in TN Historic Forum Post |
|
|
Not really, it's just a nice, convenient, and cheap controller that's capable of sending all standard X10 commands.
The IR543 can do all the commands but only if you're using a remote in conjunction with the IR543. The IR543 alone can only do unit code 1-8. That's kind of annoying when you're programming.
What *WON'T* work is a controller that has a single button for the unit code *AND* the on/off code. This is what the RF controllers, many in-wall controllers, and the mini-controllers typically do. Those won't work.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
