| Post 1 made on Friday March 16, 2001 at 12:29 |
I have a situation where I have several modules on house code A being controlled by a Pronto/IR543 and little pocket remotes and a TM751. I've recently purchased a slimline switch and 3 appliance modules to control some flourescent lights in the kitchen. I don't need these lights to be controlled by anything other than the slimline (RF) wall switch. So rather than use up valuable house-code A unit numbers I want to put them on house code B. Do I need to put in another TM751 to do this and set it to house code B or is the a receiver/transceiver that can control all house codes?
|
|
| OP | Post 2 made on Friday March 16, 2001 at 12:46 |
Chris Lefebvre Historic Forum Post |
|
|
You require another Transceiver such as the one you have. [Link: x10.com]-CL
|
|
| OP | Post 3 made on Thursday March 29, 2001 at 09:08 |
David R. Historic Forum Post |
|
|
I see X10 has a PC Receiver that listens to all House Codes...but has no one manufactured or modified a transceiver to work on more than one House Code? Those transceivers are a little bulky and I had to have several of them scattered around the house...
Sounds like a good project for someone out there with a the background in electronics....
|
|
| OP | Post 4 made on Thursday March 29, 2001 at 10:40 |
Apparently someone has. BX24-AHT All Housecode Transceiver is at: [Link: geocities.com] I don't know if this is a DIY project or an item that can be purchased ready to go.
|
|
| OP | Post 5 made on Monday April 2, 2001 at 06:14 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
