Post 1 made on Sunday July 16, 2000 at 14:06 |
We should have the ability to send macros both in a RF and Infrared mode. Right know you have to chose either IR or RF for the macro and only have an Ir attachment. In the Lexicon 700T programming there is a protocal to have a RF string and to "force" and IR string as well. Right now you don't have that option especially if some equipment is concealed and others open i.e. the television.
|
|
OP | Post 2 made on Sunday July 16, 2000 at 14:19 |
Wayne,
You are wrong, in the Macro Editor double click on the command that you want to change. If in RF mode,change the output of that command to IR. You can also have different commands go out of different pots.
Rob
|
|
OP | Post 3 made on Sunday July 16, 2000 at 14:32 |
Thnx for the info..you are right....was used to the force ir command of the lexicon 700T programming while diferent gets me where I need to be. THnx Rob
|
|
OP | Post 4 made on Thursday July 20, 2000 at 21:37 |
wel Rob.tried your ideas and have programmed into the system and they didn't work. seems there's a glich in the software. there is now a new ver 1.12 that is available.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.