| Post 1 made on Saturday June 25, 2005 at 17:05 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
I have an Elan HD 4500 system with Z Pads throughout the house via CAT 5
I would like to replace the Z Pads with touchscreens and am familiar with Elan Via pads
I wonder if the new RTI K4 touchpanel would be compatile with the HD system instead of the Via Panels???
which would be better? I also heard there is a newer, less expensive Via panel coming out: or the Sonance panel?
any opinions would be appreciated
|
|
| Post 2 made on Saturday June 25, 2005 at 17:16 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
the K4 will run anything that can be controlled via IR or Serial, further, there are Ir codes in the Mega code data base that support the elan HD line.
The K4 Touchpanels will require the following wiring:
- (1) Cat 5 for control (12V, Data and Ground)
- (1) Cat 5 for Ethernet
- Up to (4) Coaxial cables for Video (four video inputs will be
supplied on the K4)
I have not heard anything about any new touch panels from sonance
|
Never Ignore the Obvious -- H. David Gray |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
