I haven't been able to locate the hidden discrete codes, for selecting specific inputs for this plasma monitor. Do they exist, and can anyone help me locate them? Thanks!

Richard

there are some in the Mega Code List: there are links to the list in this forum

look under Panasonic/plasma /

under that heading there are several discrete command headings to look at

I think someone had posted that with the new Panasonic plasmas to discretely select an input, press the input button then the number on the keypad that corresponds to the input.

For Video-1 your macro would include "input"+"1".

I've never tested this, I just remember reading it, either here or at IP.com.

If you can use the serial interface, works like a champ, use the codes below as is
.

PANASONIC PLASMA RS 232 CODES FOR RTI


With power off, this plasma display will only respond to the PON command.


Power On= \x02PON\x03
Power Off= \x02POF\x03
Volume = \x02AVL:**\x03 Where ** is Enter-Value between 00 and 63
Audio Mute Off= \x02AMT:0\x03
Audio Mute On= \x02AMT:1\x03



Input Select Toggle= \x02IIS\x03
AV Mode= \x02IIS:VID\x03
Component/RGB Mode= \x02IIS:YP1\x03
{Processed as a Y/Pb/Pr or RGB Signal as set by this unit}
PC Mode= \x02IIS:RG1\x03


{Screen Mode}

Normal= \x02DAM:NORM\x03
Zoom= \x02DAM:ZOOM\x03
Full= \x02DAM:FULL\x03
Just= \x02DAM:JUST\x03
Auto= \x02DAM:SELF\x03



Baud Rate= 9600 BPS
NO Parity
Char length= 8Bits
Stop bit = 1Bit