Post 1 made on Tuesday July 11, 2000 at 22:43 |
I have gratefully used the hidden Hex Editor to enter the discrete IR commands listed in the Files area. Is there also a way to look at hex codes AFTER they have been entered?
|
|
OP | Post 2 made on Tuesday July 11, 2000 at 23:10 |
Daniel Tonks Historic Forum Post |
|
|
It seems to be a one-shot deal: enter hex, get the TheaterTouch version. You could look at the waveform, for what it's worth. ;-)
|
|
OP | Post 3 made on Tuesday July 11, 2000 at 23:16 |
So I have read..although I never figured out how to show that waveform?
|
|
OP | Post 4 made on Wednesday July 12, 2000 at 19:36 |
DJ Garcia Historic Forum Post |
|
|
Let's hope that for 1,2 or whatever, we get full editing capability of codes. Put it on the request list, RTI! It will be a great addition.
DJ
|
|
OP | Post 5 made on Wednesday July 12, 2000 at 22:34 |
Daniel Tonks Historic Forum Post |
|
|
It's interesting, but I heard quite a while ago that it would be a fully-supported part of TheaterTouch Designer... but no new releases have come out lately.
|
|
OP | Post 6 made on Wednesday July 12, 2000 at 23:29 |
DJ Garcia Historic Forum Post |
|
|
Actually they did have an update a month ago or so, from 1.0 to 1.11. Hopefully they'll update more often than ProntoEdit :-).
DJ
|
|
OP | Post 7 made on Wednesday July 12, 2000 at 23:41 |
Daniel Tonks Historic Forum Post |
|
|
I believe it was 1.11 which added the hex converter... or it was at the same time they (sort of) announced it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.