Post 1 made on Saturday November 13, 2004 at 13:33 |
Timber Long Time Member |
Joined: Posts: | November 2004 156 |
|
|
Does anyone know if it is possible to send a command string from RP6 RS232 to X10 CM11A receiver to control lighting? I have tried to send commands w/ no success. I do not know if the receiver is incompatable or the wrong command string.
|
|
Post 2 made on Sunday November 14, 2004 at 17:34 |
gages Founding Member |
Joined: Posts: | March 2002 23 |
|
|
Best way to do this is to buy an IR543, then stick an IR emitter from the RP6 onto the IR543.
IR543 then plugs into any outlet (does not work well thru surge suppressors).
Works like a champ.
Steve
|
|
OP | Post 3 made on Thursday November 18, 2004 at 21:51 |
Timber Long Time Member |
Joined: Posts: | November 2004 156 |
|
|
Thanks for the info. I got one & it works fine. Seems limited to only have control to only 16 units though. Enough for now.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.