Post 1 made on Friday May 28, 2004 at 00:54 |
MikeTech Long Time Member |
Joined: Posts: | March 2004 313 |
|
|
I'm playing with my first T2 since i've gotten a new computer. I use a serial pc card to program all of my other remotes and keypads. It needs to be set to comm port 7. Is there a way to set this up in the RTI program? Any help greatly appreciated. Mike
|
|
Post 2 made on Friday May 28, 2004 at 02:53 |
select Founding Member |
Joined: Posts: | January 2002 229 |
|
|
|
Post 3 made on Friday May 28, 2004 at 03:55 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
On the tool bar select >options>set com port>auto detect, do this while you have the remote plugged into your serial card and in “computer link mode”, if you don’t know how to do this, hold down the long white button on the bottom of the remote for about 5 seconds. This will pull up a service menu, toggle over 3 pages till you see computer link, press this button, then do an auto detect.
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 4 made on Friday May 28, 2004 at 08:46 |
MikeTech Long Time Member |
Joined: Posts: | March 2004 313 |
|
|
That was the first thing i did. You can only manually move it up to comm 4 and autodetect mode did not find it. When I program my Elan systems and my HTM remotes comm port must be assigned to 7. Does this mean i won't be able to use this pc card to program? Anybody know how to reassign the card to a different port? Thanks, Mike
|
|
Post 5 made on Friday May 28, 2004 at 12:46 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
I have not run into this problem before. I would call RTI and talk to Peter, perhaps he has some answers.
|
Never Ignore the Obvious -- H. David Gray |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.