Post 1 made on Saturday April 17, 2004 at 20:05 |
richardp Founding Member |
Joined: Posts: | September 2001 6 |
|
|
I have been happily using my T2 for a couple of years now and suddenly last night the right 1/2 of the touch screen had just stopped responding.
The left 1/2 works fine, but nothing on the right responds.
This makes if impossible to even re-program the remote so I can just use trhe left as I can't scroll to the PC Connect button!
Has anybody experienced anything like this and know a fix?
Thanks Richard Sydney, Australia
|
|
Post 2 made on Monday April 19, 2004 at 13:06 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
I have fixed this problem about 75 percent of the time by touching up the solder points on the display board, especially the contacts between the keypad board and the display board. TEST= squeeze between the back and front edge of the right middle of the chassis next to the display. While squeezing, use your other hand to try and use the LCD buttons in question, if they work then there is a loose solder connection.
|
Never Ignore the Obvious -- H. David Gray |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.