 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Hex to T2 This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Monday December 8, 2003 at 12:27 |
Caspyr Lurking Member |
Joined:
Posts: | December 2003
9 |
|
|
I have a InFocus 7200 projector.
There are 6 discrete codes for Power and Aspect ratio but I can't figure out how to get them to the T2.
Here is what they say on the web.
The ScreenPlay 7200 uses the NEC IR protocol.
The customer code portion of the IR packet should use the hexadecimal value 0x4E87.
Discrete Power OFF 0x39 Turns power off (Home Entertainment special)
Discrete Power ON 0x3A Turns power on (These do not exist on any remote)
Native Resize 0x3B Selects Native Resize
16:9 Resize 0x3C Selects 16:9 Resize
4:3 Resize 0x3D Selects 4:3 Resize
Letterbox Resize 0x3E Selects Letterbox Resize
Any help will be greatly appreciated.
|
|
| Post 2 made on Monday December 8, 2003 at 16:34 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,871 |
|
|
The T2 editor has a way to import pronto HEX (not what you have written). I don't know how, but if you do a search in here for Pronto you will find it. And this Pronto config file [Link: remotecentral.com] should help
|
... |
|
| Post 3 made on Monday December 8, 2003 at 20:00 |
McNasty Founding Member |
Joined:
Posts: | January 2002
1,322 |
|
|
Anthony, do you know where I can find this program? I searched with no luck. I need codes for a Sharp Aquos and can only find them in a CCF. I can't get them to learn at all.
|
|
| Post 4 made on Tuesday December 9, 2003 at 02:56 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
Hit the F12 Key when your in the IR libray manager. Better yet download the sonace K2 software their libray manager is way better than the T2 manager. [Link: sonance.com]Caspyr, I emailed you the codes you need, hope they work out!
|
Never Ignore the Obvious -- H. David Gray |
|
| Post 5 made on Friday January 9, 2004 at 01:05 |
brucese Long Time Member |
Joined:
Posts: | January 2004
35 |
|
|
I'm trying to basically the same thing in the sense that I need to do this for Thule products. Thule uses RC5 and I can input all of the necessary codes, eg. 5000 0000 0000 0001 0014 002D, into a Pronto but when I add that string into the T2 via F12 function, it comes up with an error message: "Unknown Code Type Detected". The same error also occurs with the Sonance editor. I've tried MakeHex but it isn't quite working. Any help would be appreciated. Thanks.
|
|
| Post 6 made on Wednesday January 14, 2004 at 18:57 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,230 |
|
|
5000 codes are RC-5 Database refrence codes and will not import into RTI (Or AMX or Crestron even for that matter)
Your probobly going to have to Learn those commands (BOTH alternating commands) and use the A/B Macro function to get that remote to work correctly.
|
|
|
| Post 7 made on Thursday January 15, 2004 at 00:14 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
???
I just copy the RC-5 hex over to the RTI/Sonance Library manager; I have done this with 100's of codes, works fine.
|
Never Ignore the Obvious -- H. David Gray |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
