| Post 1 made on Wednesday August 6, 2003 at 12:22 |
Mark Chirgwin Founding Member |
Joined:
Posts: | December 2001
32 |
|
|
Just purchased the ht-250 sim2. Can't get the projector to work with RF - (it does work with IR). Does anybody have any solutions. I had to learn the codes - could not find any dowload codes.
|
|
| Post 2 made on Thursday August 7, 2003 at 15:31 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,230 |
|
|
How are you extending the IR Emmitter fromt he IRF-6 to the Projector? My guess wold be a signal strength issue...... is should be 18/2 or soubled up Cat 5 for a 50 foot ish run.
|
|
|
| OP | Post 3 made on Thursday August 7, 2003 at 22:47 |
Mark Chirgwin Founding Member |
Joined:
Posts: | December 2001
32 |
|
|
My run is less than 25 feet and faces the projector
about 10 feet away. I have used the RTI with infared from the exact location of the emitter and it excepts all commands.
RTI mentioned trying putting the rubber washer on the miniplug, I tried but it did not work.
Any other thoughts!
Thanks
|
|
| Post 4 made on Thursday August 7, 2003 at 23:44 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
Put the emitter right on the projector !! It does not have the power to transmit that far, especially through a 1000 ANSI beam.
|
|
| Post 5 made on Friday August 8, 2003 at 12:36 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,230 |
|
|
Emiiters are designed to work within inches of the Remote receive... Not 10 feet.... if you cant get the wire to the projector, you need to install a Blaster that is capable os shooting 10 feet. That means a Speakercraft Amplified connecting block and a IRE5.0 Blaster Emmiter. The IRF-6 doesnt have enough output to drive a blaster.
|
|
|
| OP | Post 6 made on Sunday August 10, 2003 at 07:28 |
Mark Chirgwin Founding Member |
Joined:
Posts: | December 2001
32 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
