Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RTI PANEL APP
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday December 21, 2019 at 18:13
thibkevb
Lurking Member
Joined:
Posts:
December 2015
7
Hi,
Need some help. Just put in new Visio tv today like many times before. Some strange reason on RTI program when I have to go back a page to get back to the tv Iím running the tv cuts off. I have everything ticked off as it should be. This new tv has same codes that was in place from last Visio tv. So I went with the old codes. The only thing I tried was captured the on / off codes from new remote and put those in place. Still same issue.

If anyone would like to give me a call and help me out with this minor issue I would be grateful.

337-849-9072
KEVIN
Kevin B Thibodeaux
OP | Post 2 made on Saturday December 21, 2019 at 21:58
thibkevb
Lurking Member
Joined:
Posts:
December 2015
7
Maybe I didnít explain it well??? Let me know.
Kevin B Thibodeaux
Post 3 made on Friday January 3, 2020 at 18:50
buzz
Super Member
Joined:
Posts:
May 2003
3,420
Likely there is a "Power" command that is issued as you load the TV page. Learning this code from the native remote will result in a "Toggle." Each time that code is issued the TV will flip from ON to OFF or OFF to ON. You need to use "Discrete" "ON" and "OFF" codes.

I don't use Visio, but I assume that there are Discrete power commands in the RTI IR code database. Most TV's will ignore an "ON" command if they are already ON, however, some will pop something on screen for every power command.
OP | Post 4 made on Wednesday January 22, 2020 at 18:27
thibkevb
Lurking Member
Joined:
Posts:
December 2015
7
Sorry for the late reply I will give it a try. I have been trying to set flags but not to successfull doing it.
Kevin B Thibodeaux
Post 5 made on Wednesday January 22, 2020 at 22:43
buzz
Super Member
Joined:
Posts:
May 2003
3,420
You need a global "Is-ON" flag that tracks the TV power status. Then you need to check and manage the flag as you enter and leave each screen. Unfortunately, if the user flips the TV power using another remote, your "Is-ON" flag is out of sync with the TV.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse