Post 1 made on Thursday August 15, 2019 at 23:04 |
zatzkin Long Time Member |
Joined: Posts: | January 2014 22 |
|
|
Anyone have an example file of sending an RS232 command to the XP8 or similar. Having a difficult time getting the XP8 to receive. This is my first config with RS232, so I'm fairly positive I'm just doing something wrong.
Thanks, Z.
|
|
Post 2 made on Monday August 19, 2019 at 00:34 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
The T2x doesn’t send 232 commands, it sends triggers (either rf or signee) to the xp unit and the xp unit sends the 232 to the device your going to control.
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
OP | Post 3 made on Saturday August 24, 2019 at 16:06 |
zatzkin Long Time Member |
Joined: Posts: | January 2014 22 |
|
|
Thanks for the help... hadn't realized I needed an RM433 to receive. Thought the ability to receive commands from the controller would have been built in. working now. Thanks!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.