Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
standalone mode
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday February 24, 2018 at 03:57
kjt005
Long Time Member
Joined:
Posts:
August 2013
33
is it possible to send more than one command from a T2x in standalone mode via a macro
Post 2 made on Saturday February 24, 2018 at 10:59
Shaner
Long Time Member
Joined:
Posts:
October 2012
133
Yes
OP | Post 3 made on Monday February 26, 2018 at 02:21
kjt005
Long Time Member
Joined:
Posts:
August 2013
33
i have tried but it does not seem to work.
how do I set up the macro to run on the T2x and not the XP6
Post 4 made on Monday February 26, 2018 at 12:17
Shaner
Long Time Member
Joined:
Posts:
October 2012
133
Right click on the desired button on the T2x, choose edit properties, go to the output tab, select the standalone option and apply the settings.

Right click on the same button, choose edit macro, drag all jumps, delays and commands into the macro and save.

Now all the commands will be output from the remote.
OP | Post 5 made on Tuesday February 27, 2018 at 01:37
kjt005
Long Time Member
Joined:
Posts:
August 2013
33
thanks for the info


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse