|Post 1 made on Sunday February 18, 2018 at 01:02|
I own an RTI XP-8s and I'm wondering if it can trigger a 12V input.
The reason I'm asking:
I'm just introducing a power conditioner into my system that has several switched outlets.
I have a tube preamp and tube monoblock amps for my 2 channel system that I'd like to plug into the switched outlets of the power conditioner. The power conditioner's switched outputs only work by being triggered via a 12V trigger.
Ideally, the pre-amp would have had a 12V trigger output so that when I turn the preamp on, it would trigger the other switched outputs turning my amps on.
But the preamp doesn't have a 12V trigger output.
However, I DO have an RTI XP-8s running much of my system (including being able to turn on my preamp via IR).
So I'm wondering if the XP-8s has any sort of 12V trigger output so I could have remote control of turning on my preamp/amps via the switched intputs.
The back of the unit certainly has a lot of trigger outputs...but it's all greek to me and before I go searching for a local RTI person to program anything I first wanted to check if the XP-8s will actually do what I need.
Thanks for any help!
|Post 2 made on Sunday February 18, 2018 at 02:25|
Yes, the trigger outputs can be configured to output 12V.
|OP | Post 3 made on Sunday February 18, 2018 at 10:29 |
Great to hear, thanks for the reply!
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.