Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need Bein IR File
This thread has 11 replies. Displaying all posts.
Post 1 made on Wednesday June 14, 2017 at 19:27
rick.fronda11
New Member
Joined:
Posts:
June 2017
6
Post 2 made on Thursday June 15, 2017 at 17:13
gwstudios
Senior Member
Joined:
Posts:
June 2004
1,232
I read this today - "Hi, i found out that the DZS3000NBS remote is fully compatible with the other BeIN Sports box remote - Humax IRHD1000S"

Those Humax codes are in Bruce's Master List if I am not mistaken.
OP | Post 3 made on Friday June 16, 2017 at 11:26
rick.fronda11
New Member
Joined:
Posts:
June 2017
6
OP | Post 4 made on Saturday June 17, 2017 at 13:37
rick.fronda11
New Member
Joined:
Posts:
June 2017
6
Can you forward me atleast this Bruce's Master List?
Post 5 made on Sunday June 18, 2017 at 19:09
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,702
Here is the link

[Link: dropbox.com]
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.
OP | Post 6 made on Sunday June 18, 2017 at 19:22
rick.fronda11
New Member
Joined:
Posts:
June 2017
6
I tried all humax IR files for the bein receiver no none is working. Some one sent me a bein cml library file but its not working properly. The problem is in the numbers and ch+ & ch- commands. When I press ch+ it double shifts the channel for example CH-1 is the current channel it will be shifted to CH-3 instead of CH-2, same is the case with Ch- ir command. Regarding numbers when I press 0 receiver takes the command but only one time again If i press 0 the bein receiver doesnt take command unless and untill i press any other number. Same is the case with select command the receiver is taking 1 time only.

Is there any one here that can help out me here by sending the exact bein IR cml library file?

Really is there any one to help out me? stuck from the last one week due to this file.
Post 7 made on Monday June 19, 2017 at 01:53
gwstudios
Senior Member
Joined:
Posts:
June 2004
1,232
This is one time where the IR-PRO might be a good investment.
OP | Post 8 made on Monday June 19, 2017 at 13:24
rick.fronda11
New Member
Joined:
Posts:
June 2017
6
My bein receiver model is IRHD - 1000S/ME  91 - 00516  HUMAX

"I read this today - "Hi, i found out that the DZS3000NBS remote is fully compatible with the other BeIN Sports box remote - Humax IRHD1000S"
Those Humax codes are in Bruce's Master List if I am not mistaken."

I have tried this also, but its not working properly. Actually the other issues are like when I press 0 then receiver takes 0 but If I press 0 again it does not take. If I press 0 it takes and then if I press 1 it takes. I mean I can not give sequence like this 0000 but if I give like this 0101 it takes. The receiver gets IR commands of different numbers but not the same numbers. Similarly when I press select command it takes only one time and 2nd time it doesn't take select command unless and until I press any other no.

Can any one help me by sending this receiver IR cml library file.
"Bein receiver model is IRHD-1000S/ME 91-00516 HUMAX"
Post 9 made on Monday June 19, 2017 at 14:04
gwstudios
Senior Member
Joined:
Posts:
June 2004
1,232
You should post your request in the RTI forums in the "IR Control" section. You will probably get a lot more help than in here.
Post 10 made on Thursday June 22, 2017 at 20:47
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,702
The codes sending once, in example 0000 not working but 0101 working looks like you have toggle bit codes. The only real way to fix that is find a toggle bit code set or learn them as a/b codes. To do that you will need to learn each code twice. So in the file you will have 1a and 1b, 2a and 2b and so on.

I will look around for a set of codes but I have not dealt with the product you have.
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.
Post 11 made on Thursday June 22, 2017 at 22:01
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,702
What IR files are you using? In the Mega List 22 Beta there is a Humax IRHD-1000S/ME file. This file has the toggle codes that should fix your 0000 or 2222 not working. The file has both A and B codes in it.

In programming, on the remote each button you are putting the codes on are now going to be macros, in the macro your going to insert the A-B Toggle IR Code for the command type, when that's placed on the button insert the Digit 1A and the Digit 1B inside the bracket. Do this for all commands your going to use.

Try that and let us know if things get better for you.
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.
Post 12 made on Sunday July 9, 2017 at 22:22
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,702
Did you ever get this working? I'm assuming so since you have not come back reporting it didn't.
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse