|Post 1 made on Sunday April 23, 2017 at 01:07|
I am new to RTI programming and am having a difficult time finding IR codes for an LG TV - 65UH615A and a Cisco cable box - Explorer 4642HDC. Can someone point me in the right direction, please??
|Post 2 made on Thursday May 4, 2017 at 01:10|
Try some other models of the same brand...try some other Lg tv codes. Usually the ir codes are same over the years. Same with the cable box.
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.
|Post 3 made on Wednesday June 7, 2017 at 14:17 |
You may need to learn the LG codes from the original remote. If it is one of their "magic" remotes or whatever they call it, it might be a little tricky, but possible. I had to do that for a top of the line LG a couple years ago as only a few codes from each code set seemed to work. Took a while to get it all right and never was able to get discrete power codes that worked so I created some if then logic to make discrete power codes.
Regarding the Cisco cable box, you can also try Scientific Atlanta codes. I found that a lot of those crossed over in the past.
John G in SD
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.