Post 1 made on Saturday March 12, 2016 at 02:32 |
Optix Long Time Member |
Joined: Posts: | March 2012 118 |
|
|
My remote has not been used for a year or so. I charged and when t booted i got a red x on top left that blinks 4 times slow 4 times fast. I turned the power off on the back, allowed it to charge for 3 hours, it was then blue to my surprise. It started and back to the screen. I tried plugging on to my laptop to flash the program to see if that was a corrupt program. But remote does not seem to be recognized by Integration designer as software is not sent. Any other suggestions or is the remote dead?
Thanks
|
|
OP | Post 2 made on Saturday March 12, 2016 at 14:10 |
Optix Long Time Member |
Joined: Posts: | March 2012 118 |
|
|
Wanted to comment that i was able to fix the problem. Did a firmware update and the remote loaded up just fine.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.