| Post 1 made on Wednesday November 25, 2015 at 17:55 |
kjt005 Long Time Member |
Joined:
Posts: | August 2013
36 |
|
|
I have 2x RJS-232 RJ45 to RS-232 connectors, I think they came with the XP6
I cant find any info on how that should be connected i have checked the dealers site and got a big fat zero
do they need a null modem cable
what is their MAC address , how do I find this out
any info will be a big help
|
|
| Post 2 made on Wednesday November 25, 2015 at 22:08 |
buzz Super Member |
Joined:
Posts: | May 2003
4,371 |
|
|
I always struggle with this. Most of the time it is faster and easier to swap pins two and three, then try again -- unless, one side needs flow control. Then you'll be messing with pins seven and eight too. Most of the time neither side supports pins seven and eight. As a hedge it is usually not wrong to jump pins seven and eight on the client end of the cable.
|
|
| Post 3 made on Monday December 7, 2015 at 08:33 |
Total Control Remotes Super Member |
Joined:
Posts: | July 2006
2,987 |
|
|
You didn't mention the device you are trying to control so it's difficult to help.
A null modem vs. straight cable would be indicated in the product protocol. If it is a Null modem you will need a gender changer with reversed pins. You must use the RTi supplied connectors. A Mac address does not apply.
|
|
| Post 4 made on Tuesday December 8, 2015 at 00:13 |
mrfreeze Long Time Member |
Joined:
Posts: | November 2004
167 |
|
|
XP-6 Manual Page 16 has the pin configuration.
Found it on the dealer site.
|
|
| OP | Post 5 made on Saturday February 27, 2016 at 05:05 |
kjt005 Long Time Member |
Joined:
Posts: | August 2013
36 |
|
|
thanks, I am still working on it.
also I am looking to control a Kramer matrix switch via IP is there an IP driver out there some where
|
|
| Post 6 made on Saturday February 27, 2016 at 09:57 |
TouchCommander Active Member |
Joined:
Posts: | December 2004
602 |
|
|
mydevice.com.au has kramer driver
|
No job to small, many to big |
|
| OP | Post 7 made on Friday March 4, 2016 at 01:21 |
kjt005 Long Time Member |
Joined:
Posts: | August 2013
36 |
|
|
thanks I will check it out
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
