 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | ZM24 install on XP6 This thread has 2 replies. Displaying all posts. |
|
| Post 1 made on Saturday March 21, 2015 at 22:09 |
rjvalenta Long Time Member |
|
|
hello all... i'm at a loss here....
system had an RP6 and T2C remotes connecting via 433Mhz. first step was swapping out the RP6 for the XP6, connected up the 433 antenna, converted the system to XP6 in Integration Designer, can now do updates via the network, all was well.
Then got the ZM24 in.
Went back and updated all the firmware in both remotes and the XP6, plugged the ZM24 in to a power supply and held down the reset switch for 10 sec to get it into whatever the mode is to setup a new Zigbee network, unplugged the XP6, connected the ZM24, powered the XP6 back up, ZM24 shows both lights, the green light periodically blinks twice...
Went back into ID and told the T2C's that they were now Two-Way and Zigbee, and updated them.
now, nothing.
I can get them to work if I roll them back to 433Mhz, but the ZM24 shows no activity from either remote, and the remotes are getting no updates from the weather info from the processor.
Any tips or thoughts would be appreciated on how to chase this problem down, thanks.
rjv
|
|
| Post 2 made on Sunday March 22, 2015 at 02:41 |
Bonavox Select Member |
Joined:
Posts: | May 2008
2,349 |
|
|
The T2C remote you have, if it worked with 433Mhz, isn't a Zigbee remote, so your wasting your time.
You need a T2C 2.4GHz or a T2C+
Are you an end user? if you are, the best advice is.........
HIRE A PRO!
|
Bill's Electric & Home Theater & Plumbing & Automation & Small Engine Repair, and Animal Removal Services......did I mention we do remotes also? |
|
| Post 3 made on Wednesday April 8, 2015 at 00:08 |
roddymcg Loyal Member |
Joined:
Posts: | September 2003
6,796 |
|
|
You need a remote with an x or an i on the end to use with the ZM24.
|
When good enough is not good enough. |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
