Post 1 made on Monday January 26, 2015 at 01:52 |
psmith66 Lurking Member |
Joined: Posts: | January 2015 2 |
|
|
Hello Folks,
I have been setting up RKM-1(+) units for a client and I have everything working so far (sources, controls, etc) but I can't figure out how to activate the bass/treble controls on the keypad. The system is using an XP-8 processor along with AD-8/AD-4 for audio, and I have set up bass/treble control for the iPhones but I can't seem to make it happen for the RKM-1 units.
Any idea?
(This is my first post on the forums..)
Thanks!
-Peter
|
|
Post 2 made on Wednesday January 28, 2015 at 01:58 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,792 |
|
|
Press and Hold the Music Select Button for 10 seconds, set up the commands on the Treble and Bass pages
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 3 made on Friday January 30, 2015 at 17:21 |
Cams Long Time Member |
Joined: Posts: | January 2006 485 |
|
|
also make sure you add the ad zone var. you want bass\treble for under the bar graph tab in the prop. setting
|
|
OP | Post 4 made on Thursday February 12, 2015 at 01:09 |
psmith66 Lurking Member |
Joined: Posts: | January 2015 2 |
|
|
Thanks guys. Indeed it works, I had tried to long-press the Select Music button but not for that long! It's a bit clunky but it works.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.