 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Control of Marantz AV7702 via IP
| |
|
| Topic: | Control of Marantz AV7702 via IP This thread has 7 replies. Displaying all posts. |
|
| Post 1 made on Sunday January 4, 2015 at 21:39 |
GotGame Super Member |
Joined:
Posts: | February 2002
4,022 |
|
|
Using the XP6, I am not finding luck controlling the AV7702.
Static or DHCP; neither works.
Port 23 set on RTI.
I just got off a project a month ago that had a Marantz SR7008 and it worked.
running updated firmware on the marantz and XP6.
A couple of months ago, another Marantz (AV7701) was changed to crestron control and worked after about an hour of fiddlefarting around.
Any Insight? No RTI forums available at the moment.
|
I may be schizophrenic, but at least I have each other. |
|
| Post 2 made on Sunday January 4, 2015 at 22:07 |
completeluxury Lurking Member |
Joined:
Posts: | January 2015
5 |
|
|
as far as im aware the rti driver available is for the SR range of receivers. to be honest ive never looked into anything else - the major retailers here in aus sell marantz to customers for cheaper then the distributors sell to me for so ive never bothered.
im not sure if marantz would have different programming between units - but its always a possibility.
|
|
| Post 3 made on Monday January 5, 2015 at 00:27 |
mrfreeze Long Time Member |
Joined:
Posts: | November 2004
167 |
|
|
Which driver are you using?
The one that should be used is the Denon/Marantz driver.
Recently Denon and Marantz started using the same RS232 / IP control code set.
I would expect if using the SR series driver it would not work as you have found out.
|
|
| OP | Post 4 made on Monday January 5, 2015 at 14:48 |
GotGame Super Member |
Joined:
Posts: | February 2002
4,022 |
|
|
Yes, the new driver,
Just never done it with the AV7702. It is connected up by serial right now and working fine. Just want to get everything on IP if possible.
Not a lot of info I can find for IP control.
|
I may be schizophrenic, but at least I have each other. |
|
| Post 5 made on Monday January 5, 2015 at 18:52 |
mrfreeze Long Time Member |
Joined:
Posts: | November 2004
167 |
|
|
Are you trying to turn the AV7702 on and it is not working?
I was always getting caught out with the Denon units needing a off command first to respond to RS232 / IP control.
Not sure if this is still the case, I'm now in the habit of having the unit on and turning it off with the control system first before testing.
The other thing to check is the Network Stand By Mode is set to Always On.
|
|
| Post 6 made on Tuesday January 6, 2015 at 09:16 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
you should stick with RS232: IP control is always problematic with Denon/Marantz
|
|
| OP | Post 7 made on Tuesday January 6, 2015 at 13:06 |
GotGame Super Member |
Joined:
Posts: | February 2002
4,022 |
|
|
Thanks mR Freeze. I will try sending and OFF and then delay and ON. Default is always ON for IP control and I did check it.
In the browser interface there is a field for port setting, but it would not let me
do anything. Must only be for Proxy use?
I could just use RS-232, but my brain won't let me. :)
The other projects are working fine so far with IP.
Getting a separate router and putting the XP-6 and Marantz only on this setup and testing again.
|
I may be schizophrenic, but at least I have each other. |
|
| Post 8 made on Sunday January 11, 2015 at 11:25 |
ralliart329 Active Member |
Joined:
Posts: | October 2007
655 |
|
|
I've had issues with IP control of Marantz products in the past as well. Rs232 for these is much more stable
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
