Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Recovery Help
This thread has 5 replies. Displaying all posts.
Post 1 made on Saturday August 30, 2014 at 04:04
ranlandau
Lurking Member
Joined:
Posts:
August 2014
2
Hi All,

I'm new to RTI Integration Panel,
I'm try to recover a lost information from an XP-6 Device.

Through the ethernet it isn't possible.

But when i connect directly with USB to the XP-6, and Choose recovery,
I'm able to Recover the XP-6 Data, but no the IPad controlers.

How can i retreive both?

Thanks!
Post 2 made on Saturday August 30, 2014 at 05:43
Diskreet
Long Time Member
Joined:
Posts:
February 2011
225
You can't recover iPads.
The Future's Bright, The Future's Controllable.
Post 3 made on Saturday August 30, 2014 at 15:03
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,792
Also can't recover from network, only USB. IPads & iPhones cannot be recovered.
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
OP | Post 4 made on Sunday August 31, 2014 at 01:44
ranlandau
Lurking Member
Joined:
Posts:
August 2014
2
Hi,

So if i use USB, i only recover the XP-6 Config,
And i need to get the original IPads configuration and add it manually?
And the Sync?



Thanks.
Post 5 made on Monday September 1, 2014 at 11:29
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,792
If you can get the Ipad configurations you should have the whole file and not need to recover anything.

as for loading the files back in you can use USB or network if the XP processor is on the network.
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
Post 6 made on Friday September 5, 2014 at 10:13
ralliart329
Active Member
Joined:
Posts:
October 2007
655
The file that had the iPad program will have the XP program in it as well. You can't recover the iPad program so need this file or must start from scratch.

If you start from scratch your next problem is that the client paid $150 for a license that is registered to that xp6 for each iPad being used. This license file is needed to make a new program for the iPads and it work with the xp6.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse