|
|
|
RTI Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | RTI T4 Firmware Needed This thread has 9 replies. Displaying all posts. |
|
Post 1 made on Thursday August 28, 2014 at 15:00 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
Is there a firmware greater than 2.4 for the RTI T4 Remote?
If so, i am in dire need of the firmware. Please message me so we can make the transfer.
Thanks greatly.
|
|
Post 2 made on Thursday August 28, 2014 at 15:27 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
2.4 is the current version
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
OP | Post 3 made on Thursday August 28, 2014 at 15:45 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
Glackowitz, I haven't used the T4 in a long time and now the screen is not responding to touch. Do you know how to fix it? I mean i kept the base plugged in, but the T4 off so the battery is charged. I just unplugged the battery and will wait an hour or so and hit the on/off switch a few times. Hopefully, it will be back to normal. Do you know anything else i can do? Thanks.
Last edited by KeepAGun on August 28, 2014 15:53.
|
|
OP | Post 4 made on Thursday August 28, 2014 at 16:25 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
Haven't had my cup today. Sorry for the confusion:
I put the T4 on its base. The T4 was turned off but the base was plugged in and the green light was showing. Now after a few months of no use the T4 touch screen isn't responding.
|
|
OP | Post 5 made on Thursday August 28, 2014 at 17:19 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
I know the screen isn't messed up for one reason that when the screen saver kicks in i can touch any part of the screen and it wakes up. This problem is confounding.
|
|
Post 6 made on Friday August 29, 2014 at 22:24 |
Dave in Balto Super Member |
Joined: Posts: | January 2008 2,771 |
|
|
Any progress?
Have you tried to reprogram?
|
Hey, careful man, there's a beverage here!
The Dude |
|
OP | Post 7 made on Tuesday September 2, 2014 at 15:02 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
Dave,
Hello. Do you have a step by step guide or suggestions to fix this problem? Could my firmware not be right even though it installs?
Thanks for any help.
|
|
Post 8 made on Wednesday September 3, 2014 at 21:17 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
Have you tried to reload the program? The program may have corrupted while sitting for such a long time unused.
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 9 made on Friday September 5, 2014 at 10:10 |
ralliart329 Active Member |
Joined: Posts: | October 2007 655 |
|
|
Try to reboot remote, reload program, and since you haven't used tempt I. Some time I wouldn't be surprised at all if the issue is the battery not holding charge properly
|
|
OP | Post 10 made on Thursday September 25, 2014 at 22:20 |
KeepAGun Long Time Member |
Joined: Posts: | January 2013 53 |
|
|
ralliart329,
Thanks for the battery tip! I didn't know what to do so i finally ordered a battery on ebay. Got the battery today, charged it, then reinstalled firmware and it worked perfectly the first time. That was a frustrating problem. Anyway, thanks again.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|